Measures to prevent hidden cracks in solar panels
1. strictly control the quality of the incoming materials of the battery, and reasonably choose the thickness, hardness and solderability of the interconnection strip.
2. keep the relative humidity of the environment below 60%, and ensure that the cells are fully preheated before welding.
3. manual welding should keep the gesture light, fast and flat, avoid false welding and over welding, and avoid pressing the battery slice, especially on the string welding template.
4. machine welding should strictly monitor the welding quality to avoid false welding, over welding and ribbon offset.
5. pay attention to the el inspection before lamination, try to repair the hidden cracks before lamination, so as to avoid the expansion of the hidden cracks caused by lamination.
6. the laminated components should be fully cooled down before the edges can be trimmed. it is advisable to trim and frame the edges with the glass facing downwards.
7. the laminated parts before framing should avoid turning and manual handling.
8. work surfaces such as chamfered edges and pre-assembled frames should be large enough. after the components are placed in the center, the distance from the edge to the edge of the table should be greater than 200 mm.
9. appropriate force should be used when closing the junction box cover, and the corresponding position under the table should be set up-a larger area of support.
10. it is advisable to use steel frame pallets or double-layer wooden pallets to circulate the flat components. when using a hydraulic truck, the fork should pass through the pallet completely.
开口闪点自动测定仪制造商与您一起关注2010年浙江省仪器仪表增长显著
机械反吹式除尘器的工作原理
土壤固化技术与环境保护之间存在什么关系？
南通到荥阳空运当天到_南通到荥阳飞机航空托运
难燃节能橡塑保温板价格|价钱
Measures to prevent hidden cracks in solar panels
福州海运到德国,福州到德国海运专线
托架式卷帘防护罩功能特征
固相萃取柱萃取过程
阜阳到加拿大物流专线,阜阳到加拿大国际货运专线
丹阳到台东物流公司专线运输,丹阳到台东物流专线
烟气脱硫塔的基本知识及特点
莆田到南昌空运物流航空托运_莆田到南昌航空货运公司_宠物托运
振动监测是设备故障诊断的有效方法！
试剂应按标签说明书储存使用前恢复到室温
飞翼集装箱运输在理论和实务方面都得到逐步完善
电动高强螺栓检测仪各组成部分特点是什么呢？
珠海到巴西利亚海运物流_珠海到巴西利亚国际海运专线
瑞金海运到瑞典,瑞金到瑞典海运专线
重庆到保山空运物流,重庆到保山空运快递,重庆到保山航空货运快件运输
2. keep the relative humidity of the environment below 60%, and ensure that the cells are fully preheated before welding.
3. manual welding should keep the gesture light, fast and flat, avoid false welding and over welding, and avoid pressing the battery slice, especially on the string welding template.
4. machine welding should strictly monitor the welding quality to avoid false welding, over welding and ribbon offset.
5. pay attention to the el inspection before lamination, try to repair the hidden cracks before lamination, so as to avoid the expansion of the hidden cracks caused by lamination.
6. the laminated components should be fully cooled down before the edges can be trimmed. it is advisable to trim and frame the edges with the glass facing downwards.
7. the laminated parts before framing should avoid turning and manual handling.
8. work surfaces such as chamfered edges and pre-assembled frames should be large enough. after the components are placed in the center, the distance from the edge to the edge of the table should be greater than 200 mm.
9. appropriate force should be used when closing the junction box cover, and the corresponding position under the table should be set up-a larger area of support.
10. it is advisable to use steel frame pallets or double-layer wooden pallets to circulate the flat components. when using a hydraulic truck, the fork should pass through the pallet completely.
开口闪点自动测定仪制造商与您一起关注2010年浙江省仪器仪表增长显著
机械反吹式除尘器的工作原理
土壤固化技术与环境保护之间存在什么关系？
南通到荥阳空运当天到_南通到荥阳飞机航空托运
难燃节能橡塑保温板价格|价钱
Measures to prevent hidden cracks in solar panels
福州海运到德国,福州到德国海运专线
托架式卷帘防护罩功能特征
固相萃取柱萃取过程
阜阳到加拿大物流专线,阜阳到加拿大国际货运专线
丹阳到台东物流公司专线运输,丹阳到台东物流专线
烟气脱硫塔的基本知识及特点
莆田到南昌空运物流航空托运_莆田到南昌航空货运公司_宠物托运
振动监测是设备故障诊断的有效方法！
试剂应按标签说明书储存使用前恢复到室温
飞翼集装箱运输在理论和实务方面都得到逐步完善
电动高强螺栓检测仪各组成部分特点是什么呢？
珠海到巴西利亚海运物流_珠海到巴西利亚国际海运专线
瑞金海运到瑞典,瑞金到瑞典海运专线
重庆到保山空运物流,重庆到保山空运快递,重庆到保山航空货运快件运输