Common problems of hand-held aluminum foil sealing machine
the hand-held aluminum foil sealing machine is not suitable for stainless steel containers and metal material caps, and it should not be placed on the surface of the metal material table to press the operating button, otherwise it will destroy the equipment.
before turning on the switching power supply, be sure to plug in the induction aviation socket and clamp the screw tightly.
the equipment uses single-phase three-wire power plugs. for the safety of operators, single-phase three-wire power plugs should be used as much as possible. the road surface of the workplace must be dry to maintain the insulation layer.
the equipment is set up for automatic maintenance of over-temperature. when the temperature inside the machine is over-temperature, the passive buzzer in the machine will beep for a long time and the amber indicator light will be on, and the power switch should be turned off at this time. , after the passive buzzer of refrigeration in shutdown is terminated, it is working again.
always touch the surface of the sensor head during the whole process of work to check if it is over-temperature. if you find it is hot, stop heating and wait for cooling before working (the cooling can be done without turning off the power supply), prepare in advance (warmup) when the emerald green indicator light is not on, do not press the run button to prevent it from being turned on by mistake. after the equipment is finished working, please turn off the main power switch on the control panel.
the device is equipped with a 5a fuse, which cannot be replaced by commercial insurance over 5a.
there is high pressure in the equipment, and the base plate is energized, and unauthorized inspection and repair is prohibited to prevent personal safety and electric shock accidents.
if it is found that the power line is exposed before application, the equipment should be stopped, and it can be used after maintenance. the machine and equipment are not allowed to collide, stress, or return moisture during transportation, storage, and application.
during the acceptance of the commodity unpacking inspection project, under the condition that everything is shipped normally and the packaging is intact, if the parts of the commodity are found to be inconsistent with the freight bill, you should immediately contact the company.
according to the manual, the actual operation of the application should be clearly grasped in advance. if the quality of the product is found to be defective, the manufacturer shall indicate to the company within the required period that the machine and equipment are guaranteed for more than half a year and undertake maintenance.
note: there is a limited amount of current maintenance in the machine. when the total area of the sealed aluminum platinum is too large, or it is too close to the induction solenoid, the output will be automatically turned off, the passive buzzer in the machine will beep for a long time, and the control panel will appear abnormal maintenance. (pro.md.) the amber indicator light is on until the repair ends.
如何确保调节阀可靠的操作性及质量
干簧管AT测试仪主要技术指标
多功能化让食品包装机械走在时代前沿
我国制药设备市场发展空间巨大，创新型企业将大有可为
导致手性柱谱图中异构体分离度下降的原因及解决办法
Common problems of hand-held aluminum foil sealing machine
砝码带挂钩不锈钢砝码材质
压缩空气含油水量高原因与解决办法
便携式海康红外热像仪在日常使用中的四大优势
天津众迈厂家MBR一体化设备的调试运行管理详细
橡塑海绵板的价格报价表
西安凯新生物供应mPEG SAc，聚乙二醇单甲醚硫代乙酸酯
反渗透系统故障分析及解决方案
喷雾塔干燥机的常见故障修复方法
介绍20升旋转蒸发仪的各部件功能
关于道基反应模量测试方法你了解多少
冷热冲击试验箱压缩机结冰了怎么办？
购买快速COD测定仪的一些套路
电磁阀门有哪些种类及如何选型
9245钠离子分析仪【操作指南】
before turning on the switching power supply, be sure to plug in the induction aviation socket and clamp the screw tightly.
the equipment uses single-phase three-wire power plugs. for the safety of operators, single-phase three-wire power plugs should be used as much as possible. the road surface of the workplace must be dry to maintain the insulation layer.
the equipment is set up for automatic maintenance of over-temperature. when the temperature inside the machine is over-temperature, the passive buzzer in the machine will beep for a long time and the amber indicator light will be on, and the power switch should be turned off at this time. , after the passive buzzer of refrigeration in shutdown is terminated, it is working again.
always touch the surface of the sensor head during the whole process of work to check if it is over-temperature. if you find it is hot, stop heating and wait for cooling before working (the cooling can be done without turning off the power supply), prepare in advance (warmup) when the emerald green indicator light is not on, do not press the run button to prevent it from being turned on by mistake. after the equipment is finished working, please turn off the main power switch on the control panel.
the device is equipped with a 5a fuse, which cannot be replaced by commercial insurance over 5a.
there is high pressure in the equipment, and the base plate is energized, and unauthorized inspection and repair is prohibited to prevent personal safety and electric shock accidents.
if it is found that the power line is exposed before application, the equipment should be stopped, and it can be used after maintenance. the machine and equipment are not allowed to collide, stress, or return moisture during transportation, storage, and application.
during the acceptance of the commodity unpacking inspection project, under the condition that everything is shipped normally and the packaging is intact, if the parts of the commodity are found to be inconsistent with the freight bill, you should immediately contact the company.
according to the manual, the actual operation of the application should be clearly grasped in advance. if the quality of the product is found to be defective, the manufacturer shall indicate to the company within the required period that the machine and equipment are guaranteed for more than half a year and undertake maintenance.
note: there is a limited amount of current maintenance in the machine. when the total area of the sealed aluminum platinum is too large, or it is too close to the induction solenoid, the output will be automatically turned off, the passive buzzer in the machine will beep for a long time, and the control panel will appear abnormal maintenance. (pro.md.) the amber indicator light is on until the repair ends.
如何确保调节阀可靠的操作性及质量
干簧管AT测试仪主要技术指标
多功能化让食品包装机械走在时代前沿
我国制药设备市场发展空间巨大，创新型企业将大有可为
导致手性柱谱图中异构体分离度下降的原因及解决办法
Common problems of hand-held aluminum foil sealing machine
砝码带挂钩不锈钢砝码材质
压缩空气含油水量高原因与解决办法
便携式海康红外热像仪在日常使用中的四大优势
天津众迈厂家MBR一体化设备的调试运行管理详细
橡塑海绵板的价格报价表
西安凯新生物供应mPEG SAc，聚乙二醇单甲醚硫代乙酸酯
反渗透系统故障分析及解决方案
喷雾塔干燥机的常见故障修复方法
介绍20升旋转蒸发仪的各部件功能
关于道基反应模量测试方法你了解多少
冷热冲击试验箱压缩机结冰了怎么办？
购买快速COD测定仪的一些套路
电磁阀门有哪些种类及如何选型
9245钠离子分析仪【操作指南】